Manifold Style Boot Dryer
Description
Revision Block April 17, 2017 - Initial Release April 19, 2017 - Updated Fastening Locations To Be In The Main Housing To Reduce Part Footprint And Reduce Material Consumption. Added Step Assembly To Attached Files. Description This Is Designed As A Boot Dryer To Utilize 40Mm Equipment Fans, Which Can Typically Be Powered With 5Vdc (Usb), And Would Utilize 1" Diameter Corrugated Hose. I Should Be Including Updates To This Design, And Let Me Know About Any Feedback On Improvements! Bill Of Materials 3D Printed Manifold 3D Printed Main Body 3D Printed Fan Plate 2X 40Mm Pc Fan - Https://Www.Mcmaster.Com/#1939K17/=178Usm8 8X M4X20Mm Screws - Https://Www.Mcmaster.Com/#91290A168/=178Uth8 8X M4 Nuts - Https://Www.Mcmaster.Com/#90591A255/=178Utwi 8X M4 Plastic Thread Forming Screws - Https://Www.Mcmaster.Com/#96817A522/=178Uu8C 4X Plastic Zip Ties (For Holding The Corrugated Tubing On The Manifold) 1 Inch Inner Diameter Flexible Tubing - Https://Www.Mcmaster.Com/#5393K46/=178Uvvd
Statistics
Likes
5
Downloads
0