Bed Leveler for .5x.5x.065 in angle iron
Description
Background: I Wanted A Way To Attach My Glass Bed (Up-Cylced Inkjet All-In-One Printer Glass From The Scanner) To My Reach3D Printer. The Easy Method Would Have Been To Use The Existing Bed Leveler And Cut The Glass Down To Size To Fit Between The M3 Socket Heads. But Clearly, I Didn'T Want To Take The Easy Route And Designed New Bed Levelers. Materials Needed: 2 X Blb_Table 2 X Blb_Table (Mirrored) 2 X Blb_Mount 2 X Blb_Mount (Mirrored) 4 X M3X20 Socket Head Cap Screws (Or Whatever M3X20 You Have) 4 X M3 Nuts 4 X M3 Lock Nuts 4 X M5 Washers (Optional, Depends On Your Insulation Thickness) 1 X Insulation Of Your Choice ( I Used Two Layers Of Foam Board From The Dollar Store)
Statistics
Likes
5
Downloads
0