Triforce Spinner
Description
Zelda Fans, Nintendo Fans: This Is A Must Make! Simple Print, And All You Need Are 3 X 3/8 Nuts And A 22Mm Ball Bearing. I Have Included The Stl Files And The Fusion 360 File (Without A Name On The Side). Print The Spinner, 2 Caps, And The Top/Bottom. You Need To Glue The Top And Bottom To The 3/8 Inch Nuts To Get The Triforce Designs To "Stick" Around. I Used Ca Glue (Super Glue/Cyanoacrylate). Enjoy!
Statistics
Likes
36
Downloads
0