4" Dust Hose Mount
Description
To Be Used With 4" Worm Gear Clamp (Assumed To Be .5" Wide). Directions: Unscrew Clamp Via Worm Gear Until Apart. Pass Through The Center Of The Mount And Re-Attach The Clamp. Screw Mount Into Wall (I Use 2" Woodscrews With Washers) And Tighten The Worm Gear. Printed On Lulzbot Taz5 & Mini Without Struts Or Supports (Overhang Seems To Hold Nicely) With Pla. Layer Height Apx .20 Works Well With T-Joints And Dust Gates Too.
Statistics
Likes
1
Downloads
0