USB Flash Drive / Pendrive Case Keyring
Description
This Is A One Piece Pen-Drive Enclose Case For Sony 8Gb Usb, Might Apply To Other Models. >The Print Needs To Be Stopped Around Z=5,5 So As The Flashdrive Board Can Be Placed Inside The Case. Once You That Done, You Can Resume The Print And The Pcb Will Be Embedded In The Case. I´Ve Printed In 0,3Mm Layers Without Support But I Ended Up With A Bit Lack Of Resolution So I Would Recommend Printing It At 0,1-0,15Mm Layers.
Statistics
Likes
37
Downloads
0