Mic Stand Raspberry Pi Holder - Vertical
Description
Nigeljohnson73 Made A Great Timelapse Harness, But It Only Worked With The Raspberry Pi Camera Module Version 1, So I Made A Version That Worked With The Rpi Camera Module V2.1 Then, I Decided That I Wanted To Try And Secure His Timelapse Harness To Something. I Have A Few Mic Stands Kicking Around, So I Made An Adapter That Converts The Mic Stand (5/8"-27) To The Harness (M16X2.0 Metric). This Is Borderline Remix Territory, And It Works Well With The Timelapse Harness, So I'Ll Call It A Remix, But I'Ve Basically Created A Vertical Raspberry Pi Holder That Connects To The Standard Mic Stand. As You Can See By The Pictures, This Is A Complete Set From Holding The Camera Steady At The Appropriate Angle, To Cable Management, All The Way Down To Holding The Rpi Closer To The Camera. I Went Out And Bought A 24" Ribbon Cable, But I Imagine With This Set-Up, You Could Have One Even Shorter! Because The Keyholes Are Strangely Off-Center On The Back Of My (Wonderful!) Rpi Case, Securing The Case To Vertically Causes It To Lean To One Side. I Think The Next Iteration Will Be A Horizontally-Oriented Back-Plate. For Those Who Are Running Their Rpi Caseless, Don'T Forget To See The Cage Nigeljohnson73 Made! (Here'S The Case I Use, By The Way...Don'T Forget To Tell Them I Sent You, Even Though I Won'T Get Anything - It'S Just Nice To Know I'M Sending Business Their Way. It'S A Cool Company!) Https://Www.Amazon.Com/Zebra-Virtue-Black-Raspberry-C4Labs/Dp/B01F1O0Q8U Also, As With Any Of My Ideas/Designs, Please Let Me Know If You'D Like An Alternate Version. I Can'T Always Say I'M Going To Have The Time, But It'S Good To Have The Ideas Out There! I Can'T Wait To Print A Baby Groot Planter!
Statistics
Likes
9
Downloads
0