Ikea Jansjo Light bracket for Lulzbot Mini
Description
Bracket For A Lulzbot Mini To Attach A Jansjo Ikea Flexy Light To Better See The Print Bed. Things Needed, Two M3 Screws Between 8-12 Mm Long Printed Bracket Jansjo Kit From Ikea 2.5Mm Hex Key Number 2 Screwdriver M3 Tap (Optional) Optional Step Tap The M3 Tap Drill Holes On The Bracket. Use The Hardware From The Kit And Install The Light On The Bracket. Locate The Bolt Holes On The Left Of The Lulzbot Mini Above The Electronics Enclosure. Using The Second Set Of Clarence Holes From The Back Of The Machine Bolt On The Bracket With 2 M3 Screws. Light Kit: Http://Www.Ikea.Com/Us/En/Catalog/Products/20169658/
Statistics
Likes
3
Downloads
0