Housings for Ramps1.4/ArduinoMega/Power Supply and LCD/control wheel/SD-slot
Description
Contains Housing Designs For A Control Unit (Lcd, Control Wheel, Sd-Card Slot) And The Controller Electronics Unit (Ramps1.4/Arduino-Mega Based Controller Plus Pc/Atx-Based Power Supply) Corresponding Openscad Can Be Found Here: Https://Github.Com/Eldoberino/Openscad-Projects/Tree/Master/Housingcnccontroller. **Housingcnc-Lcd+Control** Holds Pcb With Lcd-Display, Control Wheel And Sd-Card Slot. The Pcb'S Ribbon Cables Go Through The Bottom Part Of The Housing (Through Your Table). For The Emergency Stop Button I Used A Nail Sawn In Half Mounted With The Head On The Inside, See Image. **Housingcnccontroller-Xy** Holds Ramps 1.4 Pcb Plus Atx-Based Power Supply. Contains Two 3D-Printable Parts (Sidepcb & Sidepowersupply) That Are Connected Using 4Mm Thick Pieces Of Wood (See Svg/Gcode Files) Connecting Cables For The Steppers And For The Lcd/Control Wheel/Sd-Card Are Simply Passed Through The Slot In The Wooden Side Walls.
Statistics
Likes
47
Downloads
0