Cantilever Z Flag
Description
I Tried To Print The "Z Endstop Adjuster.Stl" However It Always Came Out Horribly. Attributing This To The Fact That It'S Tiny With 2 M3 Holes And Nut Traps I Instead Made My Own With An Integrated Flag. This Removes An M3 Bolt & Nut And Takes Only A Little Longer To Print. ###Parts Required * 1 Off 3D Printed "Cantilever Z Flag.Stl" * 3 Off M3X20Mm Bolts * 3 Off M3 Nut * 2 Off 5Mm M3 Standoffs * ~70Mm Of Black Electrical Insulation Tape
Statistics
Likes
1
Downloads
0