Mic Stand Raspberry Pi Holder - Horizontal
Description
Nigeljohnson73 Made A Great Timelapse Harness, But It Only Worked With The Raspberry Pi Camera Module Version 1, So I Made A Version That Worked With The Rpi Camera Module V2.1 Then, I Decided That I Wanted To Try And Secure His Timelapse Harness To Something. I Have A Few Mic Stands Kicking Around, So I Made An Adapter That Converts The Mic Stand (5/8"-27) To The Harness (M16X2.0 Metric). I Realized That The Keyholes In The Back Of My Case Were Off-Center On One Axis, So Mounting It Vertically Looked Ugly. See Previous Thing: Http://Www.Thingiverse.Com/Thing:2270041 So I Said "This Is Really Something Brand-New. It Just Works With The Pre-Existing Harness." Not Calling This A Remix At This Point Going Forward. It Does, However, Work Really Well With The Harness By Nigeljohnson73 So Go Check It Out. The System Is Awesome! This Is Basically A Horizontal Raspberry Pi Holder That Connects To The Standard Us Mic Stand. As You Can See By The Pictures, When Used With The Harness, This Is A Complete Set From Holding The Camera Steady At The Appropriate Angle, To Cable Management, All The Way Down To Holding The Rpi Closer To The Camera. I Went Out And Bought A 24" Ribbon Cable, But I Imagine With This Set-Up, You Could Have One Even Shorter! If You'Re Using A Caseless Rpi, Don'T Forget To See The Cage Nigeljohnson73 Made! (If You Decide To Buy The Awesome C4Labs Case Pictured, Don'T Forget To Tell Them I Sent You, Even Though I Won'T Get Anything - It'S Just Nice To Know I'M Sending Business Their Way. It'S A Cool Company! This One Has A Really Nice Fan!) Https://Www.Amazon.Com/Zebra-Virtue-Black-Raspberry-C4Labs/Dp/B01F1O0Q8U I Believe The Next, Alternate Version Of This Will Have The Holes Either 6Mm Square (Probably Ideal), Or Running The Other Way (Vertically Versus Horizontally). With The Keyholes In My Case, I Had To Run The Zip-Strip In Such A Way That It Didn'T Mesh Up Perfectly With The Holes' Orientation. That'S Okay. Next Version Soon.... Also, As With Any Of My Ideas/Designs, Please Let Me Know If You'D Like An Alternate Version. I Can'T Always Say I'M Going To Have The Time, But It'S Good To Have The Ideas Out There! I May Actually Get To Printing A Baby Groot Planter Eventually!
Statistics
Likes
3
Downloads
0