E3D Titan Mount for Prusa i3 Mk2-style X Carriage
Description
I'Ve Built Yet Another Prusa I3 Clone, And I Decided To Use Mostly The Parts From The Original Prusa I3 Mk2 For My Printed Parts. Well, Some Parts Needed Modification, And Since I Wanted To Use My Mendelmax'S E3D Titan Instead Of The Stock Extruder Setup... ## Description This Is Designed To Mount A ~2Cm "Pancake" Stepper Motor And E3D Titan Extruder Onto The Prusa I3 Mk2'S X Carriage. The X Carriage I Use Started Out Life As The One Available For The Original Prusa I3 Mk2. All I Did Was Chop Parts From The Top And Bottom That Related To The Stock Extruder. On My Machine, This Mount (With Near-Stock X Ends And Carriage For The Mk2) Gives Me A Build Height Of ~190Mm And Full Access To The 213X200Mm Glass Plate That I Print On. ##Notes The Extruder Motor Mount Can Easily Lose A Millimeter On Either Side, To More Snugly Fit The Motor. It Works Perfectly Fine As-Is Though. The Hobbed Gear For The Extruder Has Approximately A Millimeter Between It And The Mount. If Your Printer Over-Extrudes, You May Need To File This A Bit To Let The Gear Turn Freely. Caveat Emptor, As I Don'T Actually Own An Original Prusa I3 Mk2 To Test This On.
Statistics
Likes
7
Downloads
0