Impulse RC Helix ZX6 Fairing Adapter for KISS ESC's
Description
I Designed This Fairing Adapter For An Impulserc Helix 6" Frame To Be Able To Use The Kiss24A Escs. I Upload Two Versions Of It. One Is Made To Be Printed In Solid Materials Like Abs,Pla And So On. The Other One Is Designed To Be Printed In Flexible Materials Like Tpu. Please Don'T Forget To Print The "Standoffs" Out Of Solid Material If You Want To Use The The Flex Version. I Highly Recommend You To Print And Use The Flex Version! There Is Still A Chance That The Solid One Can Break. For The "Solid" Version I Am Still Looking For Feedback Because I Added The Pocket For The Led After My First Build With The Adapters, Mine Are Glued In With Double Sided Tape. So Let Me Know If Something Doesn'T Work. I Used Sandpaper To Sand The Led'S Down To 9Mm Around One Axis, Otherwise They Wont Fit. I Will Attach A Picture To Show You Where To Sand(Check If You Have A Short Afterwards). I Soldered Two Of The Led'S In Parallel To The Corresponding Pads. Both Left Arms Togheter And Both Right Arms. Make Sure You Use Long Enough Wires Especially For The Back Ones. Please Post Pictures Of You Print In The Helix Thread On Rcgroups Or On Facebook. Would Love To See All These Prints! Https://Www.Youtube.Com/Watch?V=S0E8Uah_Ul0 You Need To Get A Few New Screws To Assemble The Helix With The Adapters. Front Arms / M3X18Mm Buttonhead: Https://Hobbyking.Com/De_De/Metal-Round-Head-Machine-Hex-Screw-M3X18-10Pcs-Set.Html Back Arms With The Antenna Holders / M3X20Mm Buttonhead: Https://Hobbyking.Com/De_De/Metal-Round-Head-Machine-Hex-Screw-M3X20-10Pcs-Set.Html Motor Screws M3X14Mm Button Head Or Socket Head : Https://Hobbyking.Com/De_De/7075-Alu-M3-Round-Head-Screw-14Mm-Gold.Html Https://Hobbyking.Com/De_De/Metal-Socket-Head-Machine-Hex-Screw-M3X14-10Pcs-Set.Html Led'S That You Need To Use: Http://Bit.Ly/2Rhgdeb 30 Awg Silicone Wire For Led Connections: Https://Hobbyking.Com/De_De/30Awgsiliconewire-Black-1M.Html
Statistics
Likes
9
Downloads
0