Tevo Tarantula MGN15H E3D Holder
Description
This Is My Mount For The E3D V6 On My Tevo Tarantula. Its Mounted On A Mgn15H Rail. I Mounted The Limit Switches With 12Mm Wood Screws. For The Linear Rail Went With 4 M3 Washers And 4 M3 Screws. To Mount The E3D You Need Another 2 M3 Screws And 2 M3 Nuts. Here The Parts That I Used (Better Than The Original Parts): Limit Switches: Https://Www.Banggood.Com/De/10Pcs-Micro-Limit-Switch-Roller-Lever-5A-125V-Open-Close-Switch-P-945733.Html?Rmmds=Search If You Share It, Give Attribution (!!!) Do Not Sell The Stl. If You Have Questions Or Want A Slight Change, Just Comment:) Warning::: This Part Wont Work With The Stock Tevo Tarantula. My Printer Is Heavily Modified.
Statistics
Likes
9
Downloads
0