Migbot Extruder & Hotend Replacement
Description
This Is An Extruder And Hotend Replacement 'Kit' To Switch To A Z-Axis Induction Probe And An Aluminium Finned Hotend. It Fits On The Existing X-Axis Carriage (3 Scews) And Otherwise Uses Existing Screws And Nuts From The Original Assembly. The Probe Is A Lj12A3-4-Z/Bx Such As The One Here: Https://Www.Aliexpress.Com/Item/3D-Printer-Parts-Model-Lj12A3-4-Z-Bx-Tubular-Inductive-Proximity-Sensor-Switch-Npn-3-Wire/32667956956.Html The Hotend Should Be Similar To This One: Https://Www.Aliexpress.Com/Item/Lastest-E3D-V6-Version-All-Metal-J-Head-Hotend-Wade-Or-Bowden-Extruder-With-Heater-Thermistor/32287569625.Html Be Sure To Instruct The Seller To Send The 12V Heater, 0.4Mm Nozzle And Direct Model. If You Get A Different Probe Ensure You Get An Npn Type Or Are Prepared To Create A Voltage Divider. An Npn Type Probe Will Allow You To Swap Directly With The Existing Z Endstop. Trim About 8Mm Off Of The X-Axis Endstop Extension Which Is Part Of The X-Axis Carriage. This Should Lineup The Nozzle With X=0. Configuration.H And Configuration_Adv.H For Marlin V1.0.2 Are Provided.
Statistics
Likes
5
Downloads
0