DIY LED Infinity Illusion Mirror
Description
This Is A Cool Illusion Mirror That Work With A Led Strip In Betwen Two Half-Reflecting Mirrors. <H3>Things You Need:</H3> - A Picture Frame (I Use Ribba 50X40Cm From Ikea) - A Glass Pane Of The Same Size (Or Just Buy Another Ribba) - A Led Strip (I Recommend One With 60 Leds/M) - One Way Mirror Tint Film To Cover Both Glass Panes (Better Have Some More If It Doesn'T Work At The First Time) - If You Want To Darken Your Mirror, You'Ll Need Some Car Window Tinting Film - 3D Printed Spacers - Do Yourself A Favor And Work In A <B>Dust-Free Environment</B> <H3>Tools You Need</H3> - A Sharp Cutter Knife - A Doctor Blade (Is Usually Delivered With Films) - A Spray Can With Soapy Water - Some Hot Glue <H3>Instructions</H3> <H4>Step 1</H4> Take Your Frame And Remove The Back Cover And Glass. <H4>Step 2</H4> Cut Films To Size, One To Two Millimeters Smaller Than Glass. <H4>Step 3</H4> Clean Glass. Then Spray With Soapy Water So That The Pane Is Really Wet. Carefully Remove The Protecting Film From Your Mirror Film And Apply To Both Panes. With The Doctor Blade, Remove All Air Bubbles. <H4>Step 4</H4> Install First Mirror Glass Back To Your Frame, Then Apply The Spacers With Double-Sided Adhesive Tape. You May Want To Install The Last Piece After The Led Strip. <H4>Step 5</H4> Install Led Strip. <H4>Step 6</H4> After Checking Your Led Strip And Cleaning The Glass (You'Ll See Every Dust Particle Later), Install The Second Mirror. There Should Be Enough Space Between Mirror And Picture Frame To Put The Cables Through. <H4>Step 7</H4> Install Back Cover And Glue To Frame With Hot Glue. <H4>Step 8</H4> Switch On Your Led Strip And Admire Your Self-Made Decoration!
Statistics
Likes
133
Downloads
0