Mills 1.3cc Fuel Tank
Description
The Photos Show The Tank And Tank Top Fitted To My India Mills 1.3Cc Engine. Both Parts Were Missing From My Engine. The Tank And Tank Top Are Matched Together For Size. I Doubt Whether The Tank On Its Own Would Fit An Original Metal Tank Top From A Mills 1.3Cc Engine. The Tank Has A Wall Thickness Of 1Mm Near The Top Thickening To 1.5Mm At The Bottom. It'S Printed In Translucent Pla At A Layer Height Of 0.2Mm At 100% Fill. The Tank Top Is Printed In Silver Grey Pla At The Same Settings. The 4 Lugs On The Tank Top Are Printed Vertical As Shown And Warmed With A Heat Gun To Bend Slightly Inwards To Grip The Tank. Pla Seems To Be Model Diesel Fuel Proof However The Print Is Slightly Porous And When Filled Drips Slightly. To Counteract This I Sealed The Inside. This Is Done With Plastic Weld, A Watery Solvent For Pla. This Is Poured Inside And Worked Around With A Clean Brush For A Few Seconds To Dissolve The Inner Surface Then Poured Out And Left To Set.
Statistics
Likes
20
Downloads
0