OpenAPS Edison/Explorer Enclosure
Description
This Is A Case For A Common Smaller Openaps Implementation. Note: This May Not Fit The Very New 1.3 Version Of The Explorer Board That Is Shipping In July/August Because They Made The Board 0.85Mm Thicker. Dimensions: 65X51X21Mm For 2500 Mah Version, And 65X40X21Mm For 2000 Mah Version. The Enclosures Expect The Explorer And Edison To Use 3.0Mm Spacers. The Hole On The Top Is For A Lanyard Loop. For More Info, See The Docs At: Openaps.Readthedocs.Io Video: Https://Www.Youtube.Com/Watch?V=Vhnwdiy1Z-A Battery 2500: Https://Www.Amazon.Com/Adafruit-328-Battery-Lithium-Polymer/Dp/B01Nax9Xyg Battery 2000: Https://Www.Amazon.Com/Gp/Product/B0137Itw46 Edison: Https://Www.Amazon.Com/Gp/Product/B00Ptvss4A/Ref=As_Li_Tl?Ie=Utf8&Tag=Httpwww300Blk-20&Camp=1789&Creative=9325&Linkcode=As2&Creativeasin=B00Ptvss4A&Linkid=C2B3A172Cdc64Bd2F74Bc41Dae8B7860 Explorer: Https://Enhanced-Radio-Devices.Myshopify.Com/Products/900Mhz-Explorer-Block-Pre-Order I Suggest Printing At 0.1Mm Layer Heights Because The Locking Grooves Are So Small. To Make It Easier, I Print The First Layer Double Thickness.
Statistics
Likes
7
Downloads
0