High & Dry
Description
This Is A Stepped Holder To Lift The Back Of Your Dish Drying Rack So The Water Drains Into The Sink. I Created This Because The Sink In The Break Room Where I Work Has A Lip Which Causes The Rack To Tip Away From The Sink And The Counter Is Always Wet. This Way It Drains Directly Into The Sink. I Didn'T Know How High To Lift The Rack, So I Made It Stepped - The Steps Are At 10Mm Increments. Happy Accident It Looks Vaguely Like A Wave. It'S A Very Rough Design, Clearly, But It Works Pretty Well. Very Well Actually. Added A Version 2. It Has Roundovers On The Front And Rear Edges. I Noticed The First One Chipped On The Back Edge, And Could Pinch A Finger On The Front Edge (Comments From People At Work). Printed V2 With No Supports, Curves Came Out Fine.
Statistics
Likes
8
Downloads
0