CubeX Part Cooling Fan - Front Mounted
Description
This Is A Part Cooling Fan For The Cubex And Possibly Cube Pro 3D (Not Verified) Printers. It Uses A Centrifugal Blower (See Specs Below). The Blower Spacing Is For Using Extruders 1 And 3. Remember To Print Two Ducts. I Will Eventually Upload A Plenum For A 1-2, 2-3, And 1-2-3 Option. Constructive Feedback Is Appreciated. These Files Are A Work In Progress. I Prefer To Have All My Parts Snap Together Without Fasteners, But The Plenum Will Need To Be Glued In Place For Now Until I Finalize The Design. Fan --------------------------------------- Delta Electronics Bfb0512H-R00 (12V) Https://Www.Digikey.Com/Products/En?Keywords=Bfb0512H-R00 Bfb0524H-R00 (24V) Https://Www.Digikey.Com/Products/En?Keywords=Bfb0524H-R00 Flow: 3.9Cfm @0.709In H20 Noise: 38Db Size: 51Mm X 51.3Mm X 15Mm Hardware --------------------------------------- Socket Head Machine Screws M3 X 0.5 Mm, 6 Mm Long (Quantity 2) Https://Www.Mcmaster.Com/#91292A111/=17I1Kxt Glue --------------------------------------- Loctite Professional Liquid Super Glue Http://Www.Loctiteproducts.Com/P/Sg_Bottle_Pro/Overview/Loctite-Super-Glue-Liquid-Professional.Htm
Statistics
Likes
6
Downloads
0