Anet A8 3 LED rotating bar
Description
*Updated* - The Original Version Collides With The Z Axis During Auto Leveling. Redesigned To Sit Lower (And Closer To The Z Plane). New Version Works With Autolevel. Will Post New Video Once My Daughter Solders Up The Connectors. *Updated* - V3 Left Bracket Has Been Shortened And Lowered To Support The Bl Touch Sensor. Now Both Sides Fit Without Contacting Anything On The Z Or X Axis. I Needed To Replace A Large Clamp-Style Desklamp That Was Constantly In The Way. I Had Some 12V Led Strips Lying Around And Decided To Make A Light Bar. Initially, I Made This To Help Determine The Best Position For The Light To Face And Not Come Into Contact With The X Axis Assembly. This Is The First Design And It Worked Extremely Well, So I'M Leaving It As Is. The Bar Rotates About 150 Degrees And Mounts On The Frame With No Additional Screws Or Hardware Necessary. It Is A Tight Fit To Get The Parts Together, So Work It Back And Forth A Bit. It'S Supposed To Be A Snug Fit So The Bar Won'T Move Due To Tension In The Power Wire. ** - Original Design Doesn'T Work With An Autolevel Installed. I Will Make A V2 That Does.
Statistics
Likes
13
Downloads
0