Land Minnow Skate Board
Description
I Wanted To Try To 3D Print A Small Skateboard That Was Usable And Strong. This Is What I Came Up With, It Is Just Slightly Bigger Then A Penny Board, At 23" (58.5Cm) In Length. A $15 Plastic Skateboard Was Used As A Donor For The Wheels And Trucks. Has Angled Aluminum Running Through The Inside As Supports, As Well As 6 Pins That Hold The Joint Together. I'M About 170Lbs (77Kg) And It Has Supported My Weight Fine So Far. The Axles Are 17'' Apart, Which Means For Its Small Size It Is Very Easy To Ride. Angled Aluminum Needed: Http://Www.Homedepot.Com/P/Everbilt-1-2-In-X-96-In-Aluminum-Angle-Bar-With-1-20-In-Thick-802677/204273980 Cheap Skateboard For Wheels/Trucks: Http://Www.Ebay.Com/Itm/Durable-22-Cruiser-Style-Skateboard-Complete-Light-Wheel-Penny-Board-My8L-/331869850834?Var=&Hash=Item4D44Fc0Cd2:M:M93Lalomwpixnutv_J3Jt4A Short Video: Https://Www.Youtube.Com/Watch?V=7Jf8Fjjm6R4 Update: Added Stl For Printing As A Single Piece Flat On A Build Plate.
Statistics
Likes
249
Downloads
0