Black Widow Dual Power Supply Control Box
Description
This Control Box Is A Simple Mod On The Black Widow Control Box That Uses Exiting Black Widow Control Box Parts Of The Sides And The Smoked Clear Top Panel. As This Is A First Run Edition There May Be Some Modifications You Need To Make To Have It Work For You. At This Time I Added 8 Larger 4Mm Hex Cap Screws Than The Ones That Came With The Black Widow Control Box. If You Have Assembled The Black Widow Control Box Adding These Parts Will Not Be An Issue. This Is A Work In Progress, I Currently Have My Box Up And Running But Will Be Making Modifications Over The Summer To Streamline Assembly And Wire Management. This Is A First Generation Control Box Mod With Potential For Other Upgrades. The Side Panels In The Pic Above Are My Own Custom Panels. If You Would Like To Have Your Side Panels Customized To Your Own Design Please Contact Me Via Messages Here And I Can Work Out A Special .Stl For Your Design. Until I Can Work Out How To Use The Design Your Own Using My Baseline Then It Can Be Done Here On Thingiverse. If You Like The Design And Print It Please Post Your Makes. I Like Seeing What Others Have Done Also Pop A Like As That Helps Others Find This. Good Luck And Message If You Have Any Questions Or Possible Needs. I Will Get Back To You Each Evening When I Get Home From Work.
Statistics
Likes
33
Downloads
0