Ikea LedBerg clip for Vertex K8400
Description
As I Found Out The Ikea Dioder Series Was Discontinued And I Still Wanted To Put Led-Strips In My 2Nd Vertex K8400 I Bought The Replacement Series "Ledberg" Led-Strips. These Need A Slightly Bigger Clips Than The Dioder Series Did So I Remixed H60'S Design To Fit The "Ledberg" Series. Also, The "New" 2017 Series Has Only 6 Led'S Per Strip, These Are A Bit Brighter Than The Dioder Led'S Btw As Can Be Seen The Picture. A Couple Of Drawbacks Of The Ledberg Series Are: - There Are Only 3 Strips In A Package, But, The Adapter Allows For The Connection Of 4 Strips. The Adapter Can Supply 3 Watts And The Light Strips Use 6 X 0.06 Watts = 0.36 Watts, So 4 Strips Only Use 1.44 Watts, Well Within The Limit. I Observed No Temperature Change In The Adapter Running 4 Strips. - These Led-Strips Do Not Include The Short Wires To Connect The Strips Around Corners. I Choose To Solder Wires Directly To The Strips, Though A Bit Of Extra Work This Works Fine! Using A Wire Of 5 Cm Or 2 Inches For The Metric Impaired Will Do Nicely.
Statistics
Likes
2
Downloads
0