SwitchRest - Nintendo Switch Headrest
Description
**Update: 8/12/2020** Completely Redesigned In Fusion 360 Most Notable Change Is The Locking Mechanism Is Now Easier To Use Thanks To The Suggestion Of Thingiverse User [Ivankio](Https://Www.Thingiverse.Com/Make:815561). Locks Can Be Placed On The Inside Or Outside Of The Model Whichever Way Works Best For You. **Warning** Depending On Your Printer The Rails Could Be A Bit Tight If That Is The Case Use Sandpaper Or A Small Flathead Screwdriver To Try And Make It An Easier Fit On The Switch. I Am Not Responsible If You Damage Your Switch. Have Fun. ~~**Update: 12/8/2018**~~ ~~- Added Switchrest-Complete.Stl (All Components Ready To Print In A Single Stl File, Locks Already Scaled To Fit)~~ ~~**Update: 5/24/2017**~~ ~~- Added Locking Mechanism To Secure Switch~~ ~~- Added Switchrest-Lock.Stl (Locking Mechanism)~~ ~~- Modified Switchrest-Left And Switchrest-Right Brackets~~ ~~- Added Switchrest-Complete.Stl (All Components Ready To Print In A Single Stl File)~~ ~~Scale The Locks Down To 96% In Your Slicer And Eliminate The Need Of Post Processing.~~ ~~I Highly Suggest You Do Some Post Processing On The Locks Either Sand Or File The Portion That Locks Into The Rails Before Using This Or You Will Have A Hard Time Getting Them Off And Possibly Break The Side Rails.~~ ~~Once You Can Insert/Remove The Locks Easily Proceed To Insert Your Switch.~~ ~~With These Last Changes I Consider This Completed And I Don'T Plan On Making Further Edits, Suggestions Are Always Welcomed.~~ ~~Enjoy.~~ ~~**Update: 5/15/17**~~ ~~- Added Switchrest And Switch Logos~~ ~~- Added Angled Bracket So Switch Air Intake Has Breathing Room To Prevent Overheating~~ ~~- Added Correct Printing Position For All Stls~~ ~~- Added Switchrest-Left-Right Stl Contains Both Brackets Ready To Print In Correct Position~~ ~~I Made This So My Daughter Could Play The Nintendo Switch Mounted To My Cars Headrest While We Do Road Trips.~~ ~~This Is My Initial Prototype Which I Made In 1 Hour So I Might Be Making A Few Revisions But This Works Really Well, We Recently Used It On A 4 Hour Trip And It Withstood All The Bumps You Normally Have When Driving On The Highway At 70Mph.~~ ~~I Suggest You Do A Solid Infill For Best Durability Since These Can Be A Bit Tight When Placing Them On The Switch And Need A Decent Amount Of Force To Be Removed.~~
Statistics
Likes
1645
Downloads
0