Printrbot Simple Bowden Attachment 1.75mm filament - 4mm or 10mm Fitting
Description
Fits The Printrbot Simple 2014 With The Aluminum Extruder. Printing Is Soooooo Much Smoother, Quieter And More Accurate With A Bowden Setup. I'M Using An Airtripper With 10Mm Fittings - Super Awesome! **You'Ll Need Several M3 Size Bolts In A Few Lengths:** * 2 - M3 20Mm Bolts (Preferably With Threads Running The Entire Length. For Securing Hot End. * 2 - M3 15Mm Bolts - For Securing Attachment To Motor Plate. * 1 - M3 6Mm Bolt - Maybe Longer Depending On If You'Re Using The Stock Front Y Mount Or Not... This Is To Secure The Front Of The Attachment To Motor Plate Where There Is Little Clearance Because Of Horizontal Bolts Securing Hot End. Included Is The Openscad File So You Can Fiddle With The Mounts If Need Be. *Your Hot-End Diameter Might Be A Beaver Hair Too Large, And A Few Rounds Of Plumbers Tape Should Give It A Nice Fit.* **Photos Coming Soon** *By The Way - The Stupid Customizer Is Not Working As Expected And I Can'T Remove The Tag. So Sorry. However - If You Are Up To Editing The Openscad File You'Ll Be Fine.*
Statistics
Likes
15
Downloads
0