Davis Pro Weather Station Debris Blocker
Description
This Little Wafer Just Drops Into The Rain Gauge Hopper To Catch Bird Droppings, Leaves And Pine Needles From Clogging The Small Hole At The Base Of The Rain Gauge. It Has Really Helped My Weather Station Report Rain More Consistently. No Need To Glue This In As The Taper Will Assist It In Staying Centered And In Place. Make Sure You Print This Upside Down So That You Do Not Need To Print Edge Supports. Also, Turn On Supports So That The Center Dirt Catcher Prints Properly. It Is Easy Enough To Clean These Little Support Materials Out When Done Printing. I Have Printed These In Abs And Pla.
Statistics
Likes
0
Downloads
0