pi0_to_k8200_mount
Description
A Simple Way Off Mounting A Pi0 To The K8200 Frame. Useful If You'Re Using Octopi, I'Ve Ordered A Pi0W And Then It'S Just One Usb Over To The K8200 Controller Board. Update: I'Ve Got My Hands On A Pi0W And Using The Stable Octopi 0.13 Image. It Doesn'T Setup The Onboard Wifi Out Of The Box. (The Distro Was Put Togethor Before Pi0W Was Launched). I Used A Usb Hub, Pihut Wifi Dongle, Keyboard And Hdmi Monitor And When Booted It Now Finds The Wifi Dongle And Connects. It'S Then Possible To Log In And Update Raspbian: Sudo Raspi-Config And Enable Ssh Sudo Apt-Get Update Sudo Apt-Get Dist-Upgrade Sudo Apt-Get Install Rpi-Update Sudo Rpi-Update Sudo Shutdown Now Remove The Wifi Dongle And Restart The Pi0W And The On-Board Wifi Should Be Up And Running.
Statistics
Likes
2
Downloads
0