A8 luer lock tip holder
Description
For A Setup Using The Discov3Ry Paste Extruder My Printer Needed A Holder That Can Allow Me To Use A Remote Syringe Tip. Here It Is. I Uploaded An Stl File With The Whole Setup All Lined Up. When Its Assembled, It Lines Up The Nozzle Tip In The Same Position As The Stock Fdm Extruder Nozzle. Find The 3Mm Rods From On Old Cd-Rom Drive Or Floppy Drive And Stick Them In These Holes. You Really Need To Press Them In, So Use The Rods Themselves And A Drill To Press Through The Rods In, Or Play With The Hole Size In Your Cad Program. You Need To Able To Slide The Tip Up/Down In A Pinch Or To Adjust It To The Right Height Without Re-Slicing. The Less You Mess With The Holes The Tighter Your Sliding Action Will Be So The Tip Holder Can Maintain Your Height. But Make Sure You Consider Compromising Because You Could See The Printer About To Make A Bad Move And Want To Lift The Tip Out Of The Way. For The Tip Holder You Must Consider Using Your Design Program To Tweak The Holder To Match Your Specific Equipment- Such As The Tubing To Luer Lock Female Fitting. Print The Tip Holder And Assemble It On Your Printer And You Likely Need To Tweak Parts So I Include The Disign Files .Stp .Sap And 123Dx.
Statistics
Likes
1
Downloads
0