Minimal lamp
Description
This Is My View Of A Simple Lamp That Also Adds A Bit Of Color To Everyday Life. It Basically Has 2 Pieces, A Top And A Fin That Needs To Be Printed 16 Times. From The Lamp_Top File You Can Observe That This Has Small Slots For The Blades To Fit In Snuggly. I Recommend Using 1 Or 2 Shells And A Maximum Of 0.2 Mm Resolution. The Infill Here Was 10 Or 15% I Don'T Remember. Total Print Time : About 11 Hours.
Statistics
Likes
119
Downloads
0