Parkzone P-51 Mustang (Gunfighter) Cowl 1.0

Description

This Is My First Part To Be Uploaded To Thingiverse. This Cowl Is Meant To Be A Replacement One For Parkzone'S P-51 Gunfighter. As This Is A Wip Be Prepared To Make Some Changes, And As Such Would Be Very Happy About Any Reply'S (Or Any Remade Models From You With Improvement'S). Things To Tinker With: - Wall Thickness There Are Three Files, One With A Wall Thickness Of 0.8Mm, Another One With 0.4Mm And One Solid One For You To Experiment With Different Wall Thicknesses Yourself! ------------------------------------------------------------------------------------------------------------------------------<U>Results: </U> <B>Vase Mode </B> (Cura: Spiralized Outer Contour): The Part Takes About 1 Hour To Print And Ends Up Being Pretty Sturdy (As It Is Flexible) And Very Light, Coming In At ~11 Gr. Settings(Hobbyking Pla): - Hotend: 220C - Hotbed: 70C - Flow: 102% - Speed: 60Mm/S (Initial Layer: 30Mm/S) - <B>Fan Speed: 0% <B> (Resolution Suffers A Bit But You Almost Can'T Delaminate The Layers By Hand)

Statistics

Category

Tags