Lulzbot Taz Webcam Mount v1
Description
Was Working On A Concept For Mounting My Logitech Webcam To My Lulzbot Taz 5 And Came Across Wantmys2000'S Dropcam Mount (Http://Www.Thingiverse.Com/Thing:745446). I Like The Bottom Support Bracket Design But The Arms And Mounting Plate Don'T Meet My Needs. I Want To Be Able To Extend The Heated Bed All The Way To The End So Need A Arm Design That Can Accommodate That. The Mounting Plate Needs To Support My Logitech Webcam. So With Keeping The Bottom Mounting Bracket, I Redesigned The Arms And Created A 2 Piece Mount Clamping Block. Also I Printed My Pieces Out Of Abs Due To The Proximity Of The Heated Bed. Will Need To Print 2 Of The Arms And Rotate All Pieces So That They Lay Flat. For The Bottom Support Bracket, I Bit The Bullet And Printed With Supports So The Mounting Ends Would Be Stronger With The Outline Being Drawn With A 2Mm Wall. I Used X6 M3 Heat-Set Inserts (Https://Www.Mcmaster.Com/#94180A333/=17Nqddx) And X6 M3 10Mm Hex Screws (Https://Www.Mcmaster.Com/#Socket-Head-Cap-Screws/=17Nqe5P) I Included A Webcam Pov Pict As Well. If You Like This Design And Do Wind Up Printing It, Please Share Your Picts. Update - At Work We Have A Microsoft Webcam To Mount To A Taz So Created A Version 2 Design. Http://Www.Thingiverse.Com/Thing:2325671
Statistics
Likes
4
Downloads
0