Flywheels Modular Pulley Kit
Description
Flywheels Modular Pulley Kit For Htd 5M Belts & Motor Pulleys Complete: 36 Tooth 13Mm & 16Mm Pulleys In Progress: 40 Tooth 13Mm & 16Mm Pulleys This Will Allow You To Switch Out Pulleys Without Have To Trash The Inserts And Retainers. I Am Still Working On Different Sizes, But The 36T In 13(12Mm) & 16(15Mm) Are Complete. 40T Is Coming, I Made Do A 52T As Well. These Would Not Be Possible Without [Juniorpotato93](Http://Www.Thingiverse.Com/Juniorpotato93/About) And His [Flywheel Pulleys](Http://Www.Thingiverse.Com/Juniorpotato93/Designs). You Will Need 6 Of Each Of The Following For Every Pulley Kit You Print/Mill. 10-24 X 2-1/2 In Phillips Pan Head Machine Screw 10-24 Hex Nut Stainless 1/4 In Flat Washer Stainless I Suggest Printing With Abs At 100% Infill With Raft Or Skirt, I Was More Successful Using A Skirt On Maker V2. I Purposely Made The Holes Smaller Than The Fasteners So I Could Drill Out All Of The Holes With 3/16 Bit For A Tight And Solid Fit.
Statistics
Likes
31
Downloads
0