Bigger MP Select Mini Z Axis Spacer - No Disassembly - Fusion 360
Description
This Is A Z Axis Spacer For The Mp Select Mini. Every Other Z Axis Spacer I'Ve Tried For My Printer Didn'T Quite Fit. The Spacer Wouldn'T Fit The Front-To-Back Depth Of The Gantry, Causing The Part Not To Be Flat, Causing The Z Spacing To Be Different Than Advertised. Xilvar'S Spacer Looked Really Good, But I Couldn'T Quite Get The Results I Wanted With That Openscad File. So, I Copied The Basic Shape In A Fusion 360 Design. Files With A Pretty Good Range Of Extra Z Space Are Included, But You Can Customize In Fusion 360 If You Like. In Fusion 360, Just Go To "Modify->Change Parameters" And Change The Zextraspace Parameter To The Amount Of Extra Space You Need On The Z Axis. There Is A Little Tiny B For Bottom On One Of The Ends. This Shows You Which Side Goes Down When Inserting The Spacer. Http://A360.Co/2Rgb0Yz
Statistics
Likes
11
Downloads
0