Kort Nozzle
Description
This Is A Kort Nozzle For Rc Model Boating. It Is Designed For A Dumas 1.5-In. Propeller. Abs Filament Was Used. It Uses A 1/8" Control Rod Above The Nozzle And A Stabilizing Rod At The Bottom. The Top Of The Nozzle Is Marked With A Small T And Inside Is A Notch To Prevent The Nozzle From Spinning On The Control Rod. I Found That There Was Still Too Much Play In The Control Rod, So I Drilled A Small Hole Through The Nozzle Control Sleeve And The Control Rod Then Inserted A Small (1/16") Wire Through The Holes.
Statistics
Likes
33
Downloads
0