250er Quadrocopter with CC3D
Description
Simple Self Designed Quadrocopter With Approximately 250Mm Diagonal From Motor To Motor. (Atm. The Diagonale Is ~300 But I Will Shorten It As Near As Possible To ~250Mm At The End That 6" Props Will Fit) The Project Results To Some Electrical Parts Like Escs, Cc3D And Rx Lying Around. So Here Are My Used Parts: - 2-3S 2204 Motors 2300Kv - 2-3S Emax 30A Escs (If I'Ve To Buy New, I'D Select Smaller And Lighter Escs. But To Save Money, I Used What I'Ve Got At Home) - Cc3D - Orange 6Ch Rx - 50X50Mm Power-Distribution Board - 3S - 1600Mah Lipo - 6045 Props This Setup Is Too Heavy To Fly :( Perhaps It Can Fly With Other Motors And Escs? I'Ve Redesign It For 12A Micro Escs With Variants For Some Parts Here: Https://Www.Thingiverse.Com/Thing:2339377
Statistics
Likes
4
Downloads
0