Pollux v2 Hexacopter with 10° forward angled Motors
Description
The Plates Are Carbon Fiber And The Motor Mount Is A 3D Print Part Motor Mount For A Hex With Forward Facing Motors. - Forward Angle 10° - Designed For T-Motor Mn1806 2300Kv Frame Parts: 18X M4X10 Screw 18X M4 Locknut (Din985) 10X M3X40 Pcb Spacer Female/Female 20X M3X10 Nylon 6/6 Screw 4X 3Mm Washer 3Mm Height (I Used M5 Nylon Nut) Motor Mount Parts: 24X M2X8 Screw 24X M2 Locknut (Din985) If You Have Trouble Screw And Unscrew The Locknut In Order Too Loosen Up The Fit. Flight Controller Parts: 4X M3X10 Pcb Spacer Female/Male 4X 3Mm Washer 3Mm Height (I Used M5 Nylon Nut) Change Log : V0.2 Fixed Livecammount Fitting With Frame. Reduced Maximum Camera Screw Spacing To 34Mm. V2.0 Reduced Plate Sizes In Order To Improve Climb Rates. Fpv Maiden Video: Http://Youtu.Be/Hvizb0Mzkk8 V2: Http://Youtu.Be/Aqqpwvtu-34 Angled Mounts For Other Multicopter Zmr-250 10 Degree Tilted Motor Mounts Http://Www.Thingiverse.Com/Thing:564897
Statistics
Likes
100
Downloads
0