Micro roBot with tracks
Description
It'S Called Mb3434 And You Will Find The Whole Project Description Including Pictures & Video @ Http://Letsmakerobots.Com/Node/40545 I'Ve Got Inspired By This One, The Ncee, Also @ Http://Letsmakerobots.Com/Node/39856 All The Parts Are Made With Google Sketchup. I Just Started Drawing Without Any Plan. All I Had Was The Size Of The Motors And The L293. The Battery And The Beetle Basically Set The Size Since They Are The Biggest Parts. As I Did It Just For The Parts I Had Lying Around I Am Not Sure How Re-Usable It Is. But Maybe You Will Get An Idea How To Modify It For Your Purpose. The Mold For The Tracks Is Also 3D Printed. I Used Silicon Mixed With Some Curing Agent To Make The Tracks. The Robot Is Still Work-In-Progress And There Might Be Some Changes. It'S Running On A 550Mah Lipo, Powering A Dfrobot Beetle Controller And Using 2X Qrd1114 As Front And Rear Sensor. Note: That'S My First Thingy And I Hope You Are Able To Use It. I Am Still Trying To Get Everything Right, E. G. Rotating The Parts Of The Mold. Make Sure You Check And Double Check Before You Start Printing.
Statistics
Likes
142
Downloads
0