Ghostbusters Proton Pistol
Description
This Is My Take On The Proton Pistol As Wielded By Winston Zeddemore And Agent Ortiz In Idw'S Ghostbusters Comics. See The Thread On Gbfans For A Full Build Up, Electronics Layout, And All That. Included Here Are The Stl'S, Core Sketchup File With All The Drawings, Attiny85 Arduino Sketch, And Wt588D Prop Sound Chip Programmer Project File For The Pistol. Giving It All Away For Free! Print As Imported. Update 10/10/2017: Been Meaning To Upload This For A While - I'Ve Successfully Printed Entire Shell Halves With Zero Supports In Pla So Long As You'Ve Got Good Cooling. You End Up With Some Open Weave Inside The Gun (In The Electronics Pocket) But It Really Affects Nothing. The One Problem I Ran Into Was That The Trigger Switch Mount And Spring Mount On The Right Half Won'T Print Correctly Without Supports, So I Used Meshmixer To Build In Supports To The Stl. It Prints Great, And You Just Clip The Supports Off. Very Easy. Please Leave A Comment & Picture If You Use This Version! I'Ve Printed About Half A Dozen Now This Way. I Also Uploaded The .Mix File, If You Want To Tinker With It. Update 10/14/2019: Long Time No See! Added A New Set Of Models With A Thicker Long Section Of The Barrel (15Mm Up From 10Mm) As Well As A Higher Polycount (64 Up From 32) To Reduce Faceting. This Is An Old Sketchup Model - Hopefully One Day I Redo It In Solidworks, But I Doubt It.
Statistics
Likes
30
Downloads
0