Craftsman Door Striker Plate
Description
This Is A Replacement For The Striker Plate On Doors With Older Spring Loaded Latches. I Have A 1910 Craftsman And All Of My Interior Doors Use This Type Of Latch. A Lot Of The Striker Plates Are Missing So I Based This One Off Of One That Was Lying Around. Your Mileage My Vary On Whether Or Not This Plate Will Work For You. I Would Recommend Printing One Out At Low Res, With <20% Infill And Using That To Check The Spacing On Your Door. The Thickness Of The Original Plate Was 2Mm So Be Sure To Double Check That After You Print. The One In The Photo Was Printed At .1Mm Layer Height With 80% Infill. I'Ll Update This After I'M Able To Install One In My House.
Statistics
Likes
4
Downloads
0