Total Metal Hypercube

Total Metal Hypercube

Description

A Remix Of Tech2C'S Design Using No Printed Parts, My Answer To Classic Catch 22 When It Comes To Building A 3D Printer With No Access To One For The Usual Printed Parts. I Settled On The Scs10Uu Bearing Housing As A Key To Bolting All The Aluminium Pieces Together. I Used About 1M Of 25 X 12Mm Al Bar And 1.8M Of 3Mm Thick 25Mm Eq Angle. I Used Opposing Hooks For A Display Bracket And A Chopped Down Angle D=Grinder Key For The Spool Holder. Plenty Of Challenges, First Component Failure Was The Psu Power Plug On A Cheapo Ramps Board Which I Then Upgraded To Some Spare Screw Terminals. I'M Also A Great Fan Of Heatsinks On Power Mosfets As Can Be Seen In The Ramps Pic. For The Complete Why, What And How Of What I Did, Head On Over To The Build Instructable. Https://Www.Instructables.Com/Id/Total-Metal-Hypercube-3D-Printer-No-Printed-Parts

Statistics

Likes

48

Downloads

0

Category

3D Printers