Shisha/Hookah (configurable)

Description

Simple 3D Printed Hookah, You Will Need: - 3D Printer - Pla Fillament And Ideally Flex Fillament If You Want Better Sealing - Hose (Default Values Fits Hose Of 1Cm Diameter Or You Can Use Hose Of Some Original Shisha) - Pot As This Is Only Piece That You Cannot Print (Pla And Any Other Plastic Would Melt) If You Want To Customize, Download Shisha.Scad. Otherwise Get Following Parts: - Shisha_Body.Stl - Shisha_Tube.Stl (This One Needs Supports :-/) - Shisha_Hose_End.Stl (Not Needed If You Have Existing Hose, Print With Flex For Best Result) **Todo:** - Redesign Tube To Print Without Supports - Design Nice Mouth End For Hose - Enhance Vase With Some Decorations

Statistics

Category

Tags