Tamiya 1/14 Truck rims
Description
Combined Several Of My Favorite Designs And Styles To Make A 1/14 Scale Rim That Fit The Design I Wanted For The Ossum Jeep Modifications I'M Doing. I Have Not Made A Beadlock Out Of It, So They Will Need To Be Glued, But The Steel Rim Versions Were Separated In Halves To Make For Easier Printing, And Be Assembled With A Few M2 (Or M3) Screws. I Can Make Several Offsets For These Rims Easily. But I Included 0 Offset, And For The Steel Style A 2.5Mm Offset For The Jeep Design I Intended Them For. These Are Intended To Be Used With 1:14Th Scale Tamiya Semi Truck Tires Like Can Be Found Here: (Https://Www.Aliexpress.Com/Wholesale?Catid=0&Initiative_Id=Sb_20170526173438&Searchtext=1%2F14+Tamiya+Tires) _____________________________________________________________ *6/1/17* - M.2 Nuts Didn'T Quite Fit Comfortably In The Steel Rim Back So I Enlarged Them Slightly. Along With The Slit For The Axle Peg. - I Have Printed 4 Rims, Mounted 4 Rims, And Can Confirm They Fit Snug With The Tires. There Was A Small Amount Of Prep (Typical With Home Printed Objects) To Get The Screws And Nuts To Fit But Everything Tightened Down And Lined Up! I Used M.2 Screws, But M1.6 May Look More Accurate. - One Other Note Is, Although These Lock Together For Easy Printing, They Are Not True Bead-Locks, And The Fit Is Snug Enough To Be Driven Around For My Scale Brushed Truck But If You Plan To Run These On A Higher Power System I Suggest Gluing The Tires To The Rims.
Statistics
Likes
172
Downloads
0