Hubsan x4 105mm FPV Quadcopter (Based off punkkills' Micro 105 FPV)

Description

This Is An Fpv Conversion Frame For The [Hubsan X4 107C](Https://Www.Amazon.Com/Hubsan-Channel-2-4Ghz-Copter-Camera/Dp/B00Exbdwzc/Ref=As_Li_Ss_Tl?S=Toys-And-Games&Ie=Utf8&Qid=1463024895&Sr=1-5&Keywords=Hubsan+H107C&Linkcode=Ll1&Tag=Punkkillsfpv-20&Linkid=8194Ae2036C43E1475Dec241809B67D3). * You Will Have To Remove The Camera That Comes With The Hubsan X4, * You Must Shorten, Remove, Or Tape Down The Four Corner Lights (I Shortened One Of The Red Lights And Removed The Rest, There'S Blue Leds On The Board For Syncing) * The *Original Screws* Used To Mount The Board In The Hubsan X4 Will Fit The Mount/Stand Offs, I Do Not Know The Size, I Know That All Of The Screws That Hold Together The Hubsan X4 107C Will Fit These Holes. * To Complete This Frame You Must Download One Of [The Tops From Punkkills' Micro 105 Fpv Quadcopter](Https://Www.Thingiverse.Com/Thing:1221911/#Files). I Have Named My Frames V3 And V4 As They Are Equivalent With Punkkills' V3 And V4 Frames. **For Info On Fpv Gear Read The Sections In [Punkkills' Post](Https://Www.Thingiverse.Com/Thing:1221911) Titled:** "All In One Fpv Gear", "Diy Fpv Gear", And "Video Options" As Per The Suggestion Of Punkkills, You May Use [Nylon Nuts](Http://Bit.Ly/1T6Byoa) And [Machine Screws](Http://Bit.Ly/1T9Ebbg). Personally I Have Only Used The Printable [Screw Replacements By Navyblueboss](Https://Www.Thingiverse.Com/Thing:1336747).

Statistics

Category

Tags