60mm Wanhao Duplicator 6 motherboard fan holder
Description
I Wanted A Fan To Cool The Wanhao Duplicator 6 Motherboard That Was Quieter Than The Existing 4010 Axial Fan And Provided As Good Or Better Cooling Without Raising The Printer Or Leaving Off The Bottom Cover Panel. This Is The Result. Note That It Requires A 6010 Or 6015 Axial Fan As A 25Mm Fan Is Way Too Thick. However, If You Want To Go That Route And Are Okay With Leaving The Bottom Cover Panel Off, I'Ve Also Included An Stl For A 5Mm M3 Spacer So That You Can Print Several And Raise The Mount To Allow Clearance For The Fan. You'Ll Need 4 35Mm Or 40Mm Long M3 Screws To Attach It To The Motherboard Mounts. I Purchased Mine From Amazon. I'M Not Including A Link Because Availability Changes A Lot And It'S Easier To Just Search For The Style And Quantity You Want. You'Ll Also Want A Quiet 6010 Fan. I Chose This One: Https://Smile.Amazon.Com/Gp/Product/B01Fbpqlkg/. It'S Plenty Good Enough For My Purposes (~24Db @ 3000Rpm @ 12Cfm), Given That The Original Fan Is Lucky To Get 9Cfm At 34Db. It Has Sleeve Bearings However, So If You Find A Dual Ball Bearing Fan With Specs Close To This Let Me Know. This Thing Was Made With Tinkercad. Edit It Online Https://Www.Tinkercad.Com/Things/913Q7Oditoz
Statistics
Likes
45
Downloads
0