0.05mm Increment Grip for M3x0.5pitch 42ridge Knurled Thumbscrew
Description
A 'Calibrated' Thumbscrew Grip. Allows You To Accurately Correlate How Much You Turn It With The Distance The Hotbed Will Move. ( Assumes You Have The Usual M3 0.5Mm Pitch Thumbscrew Thread. ) Ie: Rotate To The Next: ... Differently-Sized Knob And Your Hotbed Will Move 0.05Mm. ... Same-Sized Knob And Your Hotbed Will Move 0.1Mm. One Complete Rotation Is - Of Course - A 0.5Mm Hotbed Movement. Mount It Either: 1) Completely Remove One Thumbscrew And Slip This 'Grip' Over The Top. Re-Attach The Thumbscrew. Repeat For Each Thumbscrew. This Allows You To Lift And Disengage The 'Grip' Without Removing The Thumbscrew, Rotate It To A Specific Orientation, And Drop It Back Down To Re-Engage The Thumbscrew Knurls. It Can Be Useful To Have All Of The Grips Oriented The Same Way After You Level The Bed. 2) By Slipping It Onto Your Thumbscrew From Below. I Recommend A Small Dab Of Rubber/Contact Cement To Keep It In Place, And Still Allow You To Easily Remove It.
Statistics
Likes
137
Downloads
0