M12 nut - 3 Sided Hex Fidget Spinner - Long arms
Description
Print With A Brim If You Don'T Have A Sticky Bed - Helps To Keep The Ends Down. Takes A Standard 18Mm Wide M12 Nex Nut That Is 10.55Mm Deep. Centre Bearing Is Standard 608Zz Hole. Centre Hole Is 22.1Mm For A Nice Press Fit. Hex Nut Holes Are 18.3Mm For A Tight Press Fit (May Need A Vice) As Nuts Are Wider Than The Spinner, You Need To Centre Them Depth Wise.
Statistics
Likes
9
Downloads
0