AnetA8 E3Dv6 mount
Description
Took An Already Solid Design (Https://Www.Thingiverse.Com/Thing:2099577) And Modified It To Use M3 Heat-Set Threaded Inserts (0.13 Usd Each) Https://Www.Mcmaster.Com/#94180A331/=17Vmj81 Detached The Fan Mount And Made Two Version Of It That Attach By Screwing Into The Additional Threaded Mounting Points. Slimmed Up The E3Dv6 Mounting Cap To Make Clearance For This 40Mm Cooling Fan Shroud. Https://Www.Thingiverse.Com/Thing:929326 I Have Not Yet Made Any Other Attachments For It But Plan To Try A Rear Mount For The Filament Cooling Fan, Proximity Sensor Mounts To The Sides Of The Nozzle, And A Direct Drive Mount As An Alternative To The Bowden Drive. The Stl Files May Need To Be Scaled When Importing. I'Ve Had A Few Issues With Units When Saving Out The Files So They May Come In Very Small And Need To Be Scaled 25.4 To Switch From Imperial To Metric. I'Ve Included The Solid Edge Files As Well As Stp Files For Anyone Who Wants To Make Their Own Changes Or Additions. Update Feb2018: Added Carriage Version 1.4 With Heatset Insert Holes Shrunk To 4Mm Tapered For Https://Www.Amazon.De/Ensat%C2%Ae-Sd-Gewindereparatur-Eins%C3%A4Tze-Gewindeeins%C3%A4Tze-10-D%C3%Bcnnwand/Dp/B077K7Zrtd/
Statistics
Likes
20
Downloads
0