RC Servo Spline Connector - 25T Connector, Drive Shaft and Dummy Servo
Description
Drive-Shaft Connector For Generic Rc Servo 25T Spline ============================================ Updated 2017Jun28 ---------------------------- Ever Had An Rc Servo That You Wanted To Connect A Drive-Shaft To, Not A Servo Horn? Got A 3Mm Carbon Fiber Shaft And Wanted To Connect It To An Rc Servo To Twist It? Want To Connect An Rc Servo To A Customizable Spur Gear (0.5M)? This Design Was Intended To Solve That Problem, The *Dog3* Is A Clutch With 3 Teeth. One End Screws Onto The 25T Spline Of Your Servo And The Other Connects To Another *Dog3* Dog-Clutch. That Other Dog3 Can Connect To A 3Mm Shaft And There'S Sufficient Space Left On The Rear Tubular Section To Allow You To Drill And Tap 3Mm Grub-Screw Holes, As Per Your Desire, To Grip The Shaft. The Design Files Are Fully Parametric And You Can Customize Them To Your Heart'S Desire. **Now Includes A True 0.5M Spur Gear, Based On Involute Curves, That Can Be Customized, With A 25T Spline In One Side, Just For Good Measure... As Promised.** Included Is A *Dummy Generic Sg90 9G Servo*, Just For Size Included Is A *Bearing Support* Capable Of Supporting The End Of A 3Mm Shaft Using An Mr63 6X3X2.5 Bearing.
Statistics
Likes
29
Downloads
0