Z Brace Pi Zero W & Cam- adjustable, snap-together, toolless mount system
Description
This Is A Project To Add Items To Your Z Brace Rods Without The Need To Take The Rods Off, Or As Standalone Adjustable Modular Building Blocks. It Was Specifically Designed To Mount A Raspberry Pi Zero And A Pi Cam Onto The Z Brace Rods Without Any Tools, Nuts/Bolts Or Other Hardware. Fully Printable. If You Use Your Imagination You Can Use Them For Other Things, Too. The Rods I Have Are 5/16 Threaded Rod. ****A Word Of Caution: Some Of These Parts Are Tricky To Print. They Rely On Close Tolerances To Work. Play With Your Settings To Achieve Your Desired Results Or Adjust As You See Fit.**** I Hope That Y'All Find Some Use For It. I'Ve Whipped Up Several Additional Pieces To Broaden It'S Usability. The Hex Base, For Instance, Can Be Used To Mount Various Pieces To In Case You Don'T Want To Snap It To Your Z Brace Rods. The Z Clips Will Snap Down Tight. I'Ve Also Included A Screwdriver Recess For Easy Removal. This Is A Wip And I'Ve Done My Best To Test Them. They All Work For Me. Some Post-Processing Will Be Required Depending On Your Printer, Filament, Settings And Overall Printer Tune.I Don'T Plan To Refine These Much More As I Have A List Of Other Projects I'D Like To Move On To. But, If There Is Some Glaring Error I'Ll Try To Fix It. Other Than That, Feel Free To Adjust And Modify To Suit Your Needs Or Create Additional Parts To Work With It. ****Credits: While This Is Not A Remix, I Did Modify Some Parts From Other Peoples Work To Save Time. I Don'T Have The Thing Info For Those, But The Case Was Modified, And I Modified The Balls And Sockets.****
Statistics
Likes
8
Downloads
0