Honda CBR300R indicator adapters front and back
Description
For My Taste The Cbr'S Factory Indicators Are Far To Beefy, So I Replaced Them With Some Barracuda Mini Vipers. But That Is Actually Easier Said Than Done, Given The Fact That There Are No Indicator Adapters Available That Wouldn'T Leave A Massive Recess In The Fairing. – Time To Fire Up The A8. :) As Mentioned Above, The Adapters Are Designed To Fit The Barracuda Mini Vipers, Which Have An 8Mm Wide And ~19Mm Long Thread With A Pitch Of 1.25Mm. The Diameter Of The Indicator'S Arm Is 16Mm. Any Indicators With These Dimensions Should Fit Straightaway. I Used [Mike_Mattala'S](Https://Www.Thingiverse.Com/Mike_Mattala/About) Brilliant [Screw And Nut Generator](Https://Www.Thingiverse.Com/Thing:193647) To Create The Threaded Parts. The Bolt Consists Of Two Parts: [One](Https://Www.Thingiverse.Com/Thing:2360465) With An Inner Thread (Pitch: 1.25Mm, Matching My Indicators), [The Other One](Https://Www.Thingiverse.Com/Thing:2359129) With An Outer Thread (Pitch: 1.25Mm). The Whole Assembly Is Completed By A [Nut](Https://Www.Thingiverse.Com/Thing:2360461) (Pitch: 1.25Mm, Matching The Bolt) To Which I Just Added A Fixed Washer. **Assembly:** Https://Youtu.Be/Ydvyp3Nvsxq
Statistics
Likes
22
Downloads
0